Capacitor charging and discharging through a light bulb
Revision as of 17:12, 22 February 2018 by Ljacques (talk | contribs) (Created page with "__NOTOC__ Back to 5C - Capacitance<br> PIRA index: 5C30.30 ==Description== A large 50 V capacitor is charged and discharged using a light bulb as a resistor. ==Equipment...")
Back to 5C - Capacitance
PIRA index: 5C30.30
Description
A large 50 V capacitor is charged and discharged using a light bulb as a resistor.
Equipment
- Charging/Discharging capacitor setup
- Power supply
Instructions
- Make sure the switch is placed in the center position
- Set the power supply to 50V
- Connect the setup to the power supply
- Put the switch in the 'charge' position and watch the bulb light up
- (Optional) Disconnect the power supply (to show that in the discharge the light bulb is only powered by the capacitor)
- Put the switch in the 'discharge' position and watch the bulb light up
- Put the switch back in the center position and turn off the power supply.
Keywords
Images & Movies
